Lattice Method for Multiplication

Although the lattice method for multiplication is not used much in schools today, it is quite easy to understand.

I will illustrate with two good examples. Study them carefully and follow the steps exactly as shown.

In this lesson, you will learn

  • how to set up a lattice grid for a multiplication
  • how to write each product in its square, with the tens above the diagonal and the ones below
  • how to add along the diagonals and carry
  • how to read the answer from the lattice

How the Lattice Method Works: Multiply 42 and 35

Example #1: Multiply 42 and 35

Arrange 42 and 35 around a 2 × 2 grid as shown below:

42 written across the top and 35 written down the right side of an empty 2 by 2 grid

Draw the diagonals of the small squares as shown below:

The same 2 by 2 grid with a diagonal drawn through each square from the bottom left corner to the top right corner

Multiply 3 by 4 to get 12 and put 12 in the intersection of the first row and the first column as shown below.

Notice that 3 is located in the first row and 4 in the first column. That is why the answer goes in the intersection.

By the same token, multiply 5 and 2 and put the answer in the intersection of the second row and the second column.

And so forth...

The lattice filled with the products 12 and 06 in the first row and 20 and 10 in the second row, tens above each diagonal and ones below
Rule

Write every product with two digits: the tens digit above the diagonal and the ones digit below it. A one-digit product such as 6 is written as 06.

Then, going from right to left, add the numbers down the diagonals as indicated with the arrows.

The first diagonal has only 0. Bring zero down.

The second diagonal has 6, 1, 0. Add these numbers to get 7 and bring it down.

And so forth...

Orange arrows run down each diagonal of the filled lattice; the sums 1 and 4 are written in red on the left and 7 and 0 in red along the bottom

After the grid is completed, what you see in red is the answer: 1,470.

Remember

Read the answer from the top left: down the left side, then along the bottom. If the top-left digit is 0, leave it out. For 21 × 23, the lattice gives 0483, so the answer is 483.

In a lattice for 63 × 24, what goes in the square where the 4 row meets the 3 column?

Show answer

12: write 1 above the diagonal and 2 below it. 4 × 3 = 12, and the tens digit goes above the diagonal.

Another Example Showing How the Lattice Method for Multiplication Works

Example #2: Multiply 658 and 47

Arrange 658 and 47 around a 3 × 2 grid as shown below:

658 written across the top and 47 written down the right side of an empty grid with three columns and two rows

Draw the diagonals of the small squares, find products, and put the answers in intersecting rows and columns as already demonstrated:

The lattice with diagonals and the products 24, 20 and 32 in the first row and 42, 35 and 56 in the second row

Then, going from right to left, add the numbers down the diagonals as shown before.

The first diagonal has only 6. Bring 6 down.

The second diagonal has 2, 5, and 5. Add these numbers to get 12. Bring 2 down and carry the 1 over to the next diagonal.

The third diagonal has 3, 0, 3, and 2. Add these numbers to get 8 and add 1 (your carry) to 8 to get 9.

And so forth...

Worked example: Finish the diagonals of 658 × 47
  1. The fourth diagonal has 2, 4, and 4. Add them: 2 + 4 + 4 = 10. Bring 0 down and carry the 1 to the next diagonal.
  2. The fifth diagonal has only 2. Add the carry: 2 + 1 = 3. Bring 3 down.
  3. Read the red digits from the top left, down the left side and then along the bottom: 3, 0, 9, 2, 6.

658 × 47 = 30,926

The completed lattice for 658 × 47 with 3 and 0 written in red on the left and 9, 2 and 6 in red along the bottom

After the grid is completed, what you see in red is the answer to the multiplication: 30,926.

Common mistake

Forgetting the carry. In the third diagonal, 3 + 0 + 3 + 2 = 8, but the digit you bring down is 9, because you must add the 1 carried from the second diagonal.

A diagonal adds up to 14. What do you bring down, and what do you carry?

Show answer

Bring 4 down and carry 1. The ones digit stays at the end of the diagonal, and the tens digit is added to the next diagonal on the left.

I understand that this may be your first encounter with the lattice method for multiplication. It may seem that it is tough. Just practice with other examples and you will be fine.

Any questions about the lattice method for multiplication? Just contact me.

Summary

  • Write one number across the top of the grid and the other down the right side, one digit per row or column.
  • Draw a diagonal through each square, from the bottom left corner to the top right corner.
  • Multiply the digit of each row by the digit of each column and write the product where they meet: tens above the diagonal, ones below.
  • Going from right to left, add the numbers down each diagonal. Bring the ones digit down and carry the tens to the next diagonal.
  • Read the answer from the top left: down the left side, then along the bottom.

Interactive Practice: Solve 3 Lattice Multiplication Problems

Problem 1 guides you through every step. Problem 2 has fewer, bigger steps with a hint for each. In problem 3, you fill in the lattice on your own. You can skip a problem at any time, and each time you play you get new problems.

Problem 1 of 3Score: 0

Interactive Lattice Grid: Try Your Own Problem

Type two whole numbers with up to 3 digits each, and at least one of them with 2 or more digits. Fill in the lattice, then check your work. The small red boxes for carries are optional.