Metric Conversion Factors
The metric system is a standardized system of measurement used globally, renowned for its simplicity and scalability. It is based on units of ten, making conversions straightforward. Understanding metric conversion factors is essential for various applications, from everyday tasks to scientific research.
This lesson provides a concise yet comprehensive list of metric conversion factors across different measurement categories. By the end of this lesson, you'll be proficient in converting between metric units with ease.
In this lesson, you will learn
- The metric units of length, area and volume and how they relate
- What the prefixes kilo-, hecto-, deca-, deci-, centi- and milli- mean
- How to use a conversion factor to change from one unit to another
- Key factors for capacity, mass, time and temperature
1. Length in the Metric System of Measurement
Length is one of the most fundamental measurements in both daily life and scientific contexts. The metric system simplifies length measurements using base units and prefixes that denote multiples or fractions of these units.
| Unit | Symbol | Equivalent |
|---|---|---|
| Kilometer | km | 1 km = 1,000 meters (m) |
| Hectometer | hm | 1 hm = 100 meters (m) |
| Decameter | dam | 1 dam = 10 meters (m) |
| Meter | m | Base unit for length |
| Decimeter | dm | 1 dm = 0.1 meters (m) |
| Centimeter | cm | 1 cm = 0.01 meters (m) |
| Millimeter | mm | 1 mm = 0.001 meters (m) |
Understanding the Prefixes
- Kilo- (k): Multiplies the base unit by 1,000.
- Hecto- (h): Multiplies the base unit by 100.
- Deca- (da): Multiplies the base unit by 10.
- Deci- (d): Divides the base unit by 10.
- Centi- (c): Divides the base unit by 100.
- Milli- (m): Divides the base unit by 1,000.
Each step between neighboring length units (km, hm, dam, m, dm, cm, mm) is a factor of 10. Going to a smaller unit, the number gets bigger; going to a bigger unit, the number gets smaller.
Practical Examples
- 1 km = 1,000 m, so the conversion factor is 1,000 m1 km.
- Multiply: 5 km × 1,000 mkm = 5,000 m. The km cancel.
Answer: 5,000 meters
Example 2: Converting centimeters to meters. Convert 250 centimeters to meters.
Answer: 2.5 meters
Multiplying by 100 when going from centimeters to meters. A meter is bigger than a centimeter, so you need fewer of them: 250 cm is 2.5 m, not 25,000 m.
How many meters are in 3.4 kilometers?
Show answer
3,400 m. 3.4 km × 1,000 = 3,400 m.
2. Area in the Metric System of Measurement
Area quantifies the extent of a two-dimensional surface. Metric area units are based on square measurements.
| Unit | Symbol | Equivalent |
|---|---|---|
| Square Meter | m2 | Base unit for area |
| Square Decimeter | dm2 | 1 m2 = 100 dm2 |
| Square Centimeter | cm2 | 1 m2 = 10,000 cm2 |
| Square Millimeter | mm2 | 1 m2 = 1,000,000 mm2 |
| Hectare | ha | 1 ha = 10,000 m2 |
Understanding the Units
- Hectare (ha): Commonly used in measuring land areas.
- Square Decimeter (dm2): Useful for smaller area measurements.
- Square Centimeter (cm2): Often used in technical and engineering contexts.
- Square Millimeter (mm2): Employed in precision measurements.
Practical Examples
Example 1: Converting square meters to hectares. How many hectares are in 50,000 square meters?
Answer: 5 hectares
Example 2: Converting square centimeters to square meters. Convert 500 square centimeters to square meters.
Answer: 0.05 square meters
Using the length factor for area. 1 m = 100 cm, but 1 m2 = 100 × 100 = 10,000 cm2, because a square meter is 100 cm long and 100 cm wide.
How many square meters are in 2.5 hectares?
Show answer
25,000 m2. 2.5 × 10,000 = 25,000.
3. Volume in the Metric System of Measurement
Volume measures the space an object occupies. In the metric system, volume is typically expressed in cubic units.
| Unit | Symbol | Equivalent |
|---|---|---|
| Cubic Meter | m3 | Base unit for volume |
| Cubic Decimeter | dm3 | 1 m3 = 1,000 dm3 |
| Cubic Centimeter | cm3 | 1 m3 = 1,000,000 cm3 |
| Cubic Millimeter | mm3 | 1 m3 = 1,000,000,000 mm3 |
Understanding the Units
- Cubic Decimeter (dm3): Equivalent to a liter (L).
- Cubic Centimeter (cm3): Also equivalent to a milliliter (mL).
- Cubic Millimeter (mm3): Used in highly precise measurements, such as in engineering.
Practical Examples
Example 1: Converting cubic meters to cubic centimeters. How many cubic centimeters are in 2 cubic meters?
Answer: 2,000,000 cubic centimeters
Example 2: Converting liters to cubic decimeters. Convert 3 liters to cubic decimeters.
3 L = 3 dm3
Answer: 3 cubic decimeters
A bottle holds 750 cm3. How many liters is that?
Show answer
0.75 L. 750 cm3 = 750 mL, and 1,000 mL = 1 L, so 750 ÷ 1,000 = 0.75 L.
More Metric Conversion Factors
Here is a concise list of more metric conversion factors.
Capacity in the metric system of measurement
- 1,000 liters or 1,000 L = 1 kiloliter or 1 kL
- 1,000 milliliters or 1,000 mL = 1 liter or 1 L
Mass in the metric system of measurement
- 1 kilogram or 1 kg = 1,000 grams or 1,000 g
- 1,000 kilograms or 1,000 kg = 1 metric ton or 1 t
- 1,000 milligrams or 1,000 mg = 1 gram or 1 g
Time units used with the metric system
- 60 seconds or 60 s = 1 minute or 1 min
- 60 minutes or 60 min = 1 hour or 1 hr
- 24 hours or 24 hr = 1 day
- 365 days = 1 year (366 days in a leap year)
Temperature in degrees Celsius (°C)
- 0°C = freezing point of water
- About 37°C = normal body temperature
- 100°C = boiling point of water (at sea level)
How many grams are in 2.3 kilograms?
Show answer
2,300 g. 1 kg = 1,000 g, so 2.3 × 1,000 = 2,300 g.
A Figure Summarizing the Metric Conversion Factors
Length
- 1 m = 100 cm
- 1 km = 1,000 m
- 1 cm = 10 mm
Area
- 1 m2 = 100 dm2
- 1 cm2 = 100 mm2
- 1 ha = 10,000 m2
Volume
- 1 m3 = 1,000 dm3
- 1 dm3 = 1,000 cm3
- 1 dm3 = 1 L
Mass
- 1 kg = 1,000 g
- 1 t = 1,000 kg
- 1 g = 1,000 mg
Capacity
- 1 L = 10 dL
- 1 L = 1,000 mL
- 1 hL = 100 L
Time
- 1 hr = 60 min
- 1 min = 60 s
- 1 day = 24 hr
Summary
- Metric units are based on powers of ten: kilo = 1,000, hecto = 100, deca = 10, deci = ÷ 10, centi = ÷ 100, milli = ÷ 1,000.
- To convert, multiply by a conversion factor such as 1,000 m1 km, so the old unit cancels.
- Area factors are squared: 1 m2 = 10,000 cm2. Volume factors are cubed: 1 m3 = 1,000,000 cm3.
- 1 dm3 = 1 L and 1 cm3 = 1 mL.
- 1 kg = 1,000 g, 1 t = 1,000 kg and 1 g = 1,000 mg.
Test Yourself: Interactive 10-Question Quiz
Now check what you learned. Every answer is explained, and each time you play you get new questions.
Quiz complete!
Keep learning