IV Calculations for Nurses
Goals
- Calculate pump rates in mL/hr and drip rates in gtt/min.
- Find infusion time, finish time and volume infused, and recalculate a rate that is behind.
- Work out IV piggybacks, percent solutions and dilutions.
- Calculate heparin, insulin and other drips in units/hr, mg/hr, mcg/min and mcg/kg/min.
Jump to a section
The Math for Nurses Series
Three Kinds of IV Questions
IV calculations answer three kinds of questions: how fast to run a fluid (mL/hr or drops per minute), how long it will take and when it will finish, and how much drug a patient is getting from a continuous infusion (units/hr, mg/hr, mcg/kg/min).
The math is the same multiply-and-divide you already know, with time added. Work carefully with hours versus minutes and mg versus mcg; those two conversions cause most IV calculation errors. Infusions of high-alert drugs like heparin and insulin are usually double-checked by a second nurse.
Pump Rates (mL/hr)
IV pumps are set in milliliters per hour.
Volume over time
Divide the volume by the time in hours. If the time is in minutes, change it to hours first (divide by 60), or multiply by 60 at the end. Most pumps are set in whole mL/hr.
Watch out: Dividing by minutes and calling the answer mL/hr. 250 รท 30 = 8.3 mL per minute, not per hour.
Drip Rates (gtt/min)
Without a pump, the nurse counts drops in the drip chamber and adjusts the roller clamp.
The drop factor
The drop factor, printed on the tubing package, tells how many drops make 1 mL. Macrodrip sets are 10, 15, or 20 gtt/mL, for most adult fluids. Microdrip sets are 60 gtt/mL, for small or exact amounts. Round the answer to a whole drop.
The microdrip shortcut
With a 60 gtt/mL set, the 60 drops and the 60 minutes cancel, so the drops per minute equal the mL per hour.
Watch out: Forgetting to change hours to minutes. 1,000 ร 15 รท 8 = 1,875 is not a drip rate anyone could count.
Infusion Time, Finish Time, and Volume
How long will it take?
Time in hours = total mLmL/hr. Change a decimal part of an hour to minutes by multiplying by 60.
When will it finish?
Add the infusion time to the start time in 24-hour time. If the total passes 2400, subtract 2400; it finishes the next day.
How much has been infused?
Volume = rate ร time. Subtract from the bag's starting volume to find how much is left.
Recalculating a Rate That Is Behind or Ahead
Gravity IVs often run off schedule. The fix is to recalculate with what is left.
New rate from what remains
New rate = volume lefthours left. Then find how much the rate changed: new rate โ old rateold rate ร 100. Many programs teach that a change of more than about 25% needs the provider's approval. Follow your facility's policy, and assess the patient before running fluid faster.
New rate: 5003 = 166.7 โ 167 mL/hr
Change: 167 โ 125125 = 42125 = 0.336 โ about 34% faster, so check with the provider first
Watch out: Simply speeding up to โcatch upโ without recalculating or checking the patient.
IV Piggybacks (Secondary Infusions)
Small bags of medicine (often 50 to 250 mL) given over a short time, usually 20 to 60 minutes.
Short infusions
Use the same formulas; just watch the minutes. On a pump, change the minutes to hours. By gravity, use the minutes directly in the drip formula.
Percent Solutions and Dilutions
Grams in an IV bag
A percent on an IV bag means grams per 100 mL. Grams in the bag = percent100 ร mL.
Diluting to a weaker strength
Tube feedings and some solutions are ordered at a fraction of full strength, like ยพ strength. The fraction is the part that is the original product; the rest is water.
Watch out: Adding the fraction of water instead of product (ยพ strength is ยพ product, ยผ water).
Heparin and Insulin Drips (units/hr)
High-alert drugs. Find the concentration first, then convert between units/hr and mL/hr.
From units/hr to mL/hr
Divide the drug by the volume to get units per mL. Then divide the ordered units/hr by the units per mL.
From mL/hr to units/hr, and weight-based heparin
To find what the patient is receiving, multiply the pump rate by the concentration. Weight-based heparin orders give units/kg/hr; multiply by the weight first.
mg/hr, mg/min, and mcg/min
Same idea: concentration first, then match the time units.
mg/hr and mg/min
For mg/hr, divide by the concentration in mg/mL. For mg/min, multiply by 60 first to get mg/hr.
mcg/min
Change the bag to mcg/mL (mg ร 1,000), change the order to mcg/hr (ร 60), then divide.
Watch out: Leaving the bag in mg and the order in mcg. The answer is then off by 1,000.
Weight-Based Drips (mcg/kg/min)
The hardest calculation nurses do, used in critical care.
From mcg/kg/min to mL/hr
Work it in steps, or all at once with dimensional analysis.
- Concentration: change the bag to mcg/mL.
- Dose per minute: mcg/kg/min ร kg.
- Dose per hour: ร 60.
- mL/hr: divide by the concentration.
Concentration: 400,000 mcg250 mL = 1,600 mcg/mL
5 ร 80 = 400 mcg/min โ ร 60 = 24,000 mcg/hr โ 24,0001,600 = 15 mL/hr
From mL/hr back to mcg/kg/min
To check what a running drip delivers, reverse the steps: rate ร concentration gives mcg/hr; divide by 60 and by the weight.
Watch out: Using pounds instead of kilograms, or forgetting the ร 60.
Practice Problems
Round mL/hr and gtt/min to whole numbers unless noted.
Rates
- 1,500 mL over 12 hours. mL/hr?
- 250 mL over 2 hours with 10 gtt/mL. gtt/min?
- 80 mL/hr with a microdrip set. gtt/min?
- 150 mL/hr with 15 gtt/mL. gtt/min?
Show answers
- 125 mL/hr
- 250 ร 10120 = 20.8 โ 21 gtt/min
- 80 gtt/min
- 150 ร 1560 = 37.5 โ 38 gtt/min
Time and volume
- 750 mL at 100 mL/hr. How long?
- A 1,000 mL bag at 125 mL/hr starts at 1900. When will it finish?
- A 1,000 mL bag should run over 10 hours. After 4 hours, 700 mL remain. New rate, and the percent change?
Show answers
- 7.5 hr = 7 hr 30 min
- 8 hr โ 1900 + 800 = 2700 โ 2400 = 0300 the next day
- 7006 = 116.7 โ 117 mL/hr; old rate 100 โ 17% faster
Piggybacks, solutions, and dilutions
- 100 mL over 40 minutes on a pump. mL/hr?
- How many grams of dextrose are in 250 mL of D10W (10%)?
- Prepare 360 mL of โ -strength formula. How much formula and water?
Show answers
- 10040 ร 60 = 150 mL/hr
- 10100 ร 250 = 25 g
- 120 mL formula + 240 mL water
Drips
- Heparin 20,000 units in 500 mL. Order: 1,200 units/hr. mL/hr?
- Insulin 50 units in 100 mL runs at 8 mL/hr. Units/hr?
- 1 g in 250 mL. Order: 2 mg/min. mL/hr?
- Order: 3 mcg/kg/min. Patient: 70 kg. Bag: 250 mg in 250 mL. mL/hr (nearest tenth)?
Show answers
- 40 units/mL โ 1,20040 = 30 mL/hr
- 0.5 units/mL ร 8 = 4 units/hr
- 4 mg/mL; 2 ร 60 = 120 mg/hr โ 1204 = 30 mL/hr
- 1,000 mcg/mL; 3 ร 70 ร 60 = 12,600 mcg/hr โ 12,6001,000 = 12.6 mL/hr
Keep learning