Dosage Calculations for Nurses
Goals
- Find D, H and Q in an order and a label, and write doses safely.
- Calculate doses with the formula method, ratio and proportion, and dimensional analysis.
- Work out amounts for tablets, oral liquids, injections and reconstituted powders.
- Calculate drugs measured in units, mEq and percent, and round to an amount you can measure.
Jump to a section
The Math for Nurses Series
How Much Do I Give?
A dosage calculation answers one question: how much do I give? You take the dose ordered, the strength on the label, and the form the drug comes in, and turn them into a number of tablets, milliliters, or units.
This lesson covers the three calculation methods, then applies them to tablets, oral liquids, injections, powders that must be mixed, and drugs measured in units or mEq. If fractions, decimals, or conversions feel shaky, review the earlier lessons in the series first.
Finding the Numbers You Need
Every problem uses the same three pieces of information.
D, H, and Q
D (desired) is the dose ordered by the provider, like 500 mg. H (have) is the strength on the label, like 250 mg. Q (quantity) is the amount that contains H, like 1 tablet or 5 mL.
On a liquid label, the strength is a ratio such as โ250 mg per 5 mLโ: H = 250 mg and Q = 5 mL. Ignore the total amount in the bottle (like โ100 mLโ); it doesn't change the dose.
Watch out: Using the total volume of the bottle or vial as Q.
Check the units first
D and H must be in the same unit before you calculate. If the order is in grams and the label is in milligrams, convert one of them first.
Learn more: Conversions for nurses
Writing Numbers Safely
These rules prevent 10-fold and 1,000-fold dose errors.
Always a leading zero
Write 0.5 mg, never .5 mg. If the decimal point is missed, .5 mg looks like 5 mg.
Never a trailing zero
Write 5 mg, never 5.0 mg. If the decimal point is missed, 5.0 mg looks like 50 mg.
Spell out units
Write 10 units, never 10 U, and mcg, never ยตg. U can look like 0, and ยตg can look like mg.
Does the answer make sense?
Most oral doses are ยฝ to 3 tablets or a few mL, and most injections are under 3 mL in one site. An answer of 20 tablets or 0.02 mL is a signal to recheck the setup and the units.
Three Ways to Calculate a Dose
All three give the same answer. Pick the one you understand best, and use another to double-check.
1. Formula method (desired over have)
Divide the dose you want by the dose you have, then multiply by the quantity it comes in.
2. Ratio and proportion
Set the label ratio equal to the ordered ratio, with x for the unknown amount, and cross-multiply.
3. Dimensional analysis
Start with the unit you want the answer in. Multiply by fractions so every other unit cancels. This method handles conversions in the same line, which makes it the favorite for multi-step problems.
- Write the answer unit (mL = ?).
- Put the label ratio next, with mL on top.
- Multiply by the order, so mg cancels.
- Add conversion factors if any units still need to cancel.
Tablets, Capsules, and Oral Liquids
Tablets and capsules
Use the formula with Q = 1 tablet. Only scored tablets can be split, and usually only in half. Capsules, enteric-coated, and extended-release tablets must never be split or crushed. If the answer isn't a whole or half tablet, recheck the math, or ask the pharmacy for another strength.
More practice: Tablet dosage calculation
Oral liquids
Use the formula with Q = the volume on the label. Measure with an oral syringe or a medicine cup, not a spoon.
More practice: Oral dosage solution calculation
Syringes and Injections
Your answer has to match a line you can actually measure on the syringe.
| Syringe | Each small line | Use it for | Round answers to |
|---|---|---|---|
| 1 mL (tuberculin) | 0.01 mL | Amounts under 1 mL | hundredths (0.75 mL) |
| 3 mL | 0.1 mL | Most injections, 1 to 3 mL | tenths (1.3 mL) |
| 5 mL and 10 mL | usually 0.2 mL | Larger volumes, flushes | the nearest line |
| Insulin 30 or 50 units (0.3 or 0.5 mL) | 1 unit | Small insulin doses | whole units |
| Insulin 100 units (1 mL) | usually 2 units | Insulin doses over 50 units | even units on most brands |
Injection volumes
Use the formula exactly as for liquids, with Q = the volume in the vial's strength. Then choose the smallest syringe that holds the dose, so the lines are as fine as possible.
Watch out: Picking a syringe whose lines can't show your answer, like trying to measure 0.75 mL on a 3 mL syringe.
Reconstituting Powders
Some drugs come as a powder and must be mixed with a liquid (the diluent) before you calculate.
How reconstitution works
The label or package insert tells you which diluent, how much to add, and the concentration you get after mixing, like 250 mg/mL. Use that final concentration as H and Q in your calculation.
The powder itself takes up space, so the final volume is a little more than the liquid you added. That's why you never use the amount of diluent as Q; always use the concentration the label gives.
- Read the instructions: diluent type, amount to add, final concentration.
- Add the diluent and mix.
- Calculate the dose with the final concentration.
- For multi-dose vials, label the vial with the date, time, concentration, and your initials.
Watch out: Dividing the vial strength by the diluent volume (1 g รท 3.6 mL). Use the concentration printed on the label.
Units, mEq, and Percent Drugs
Some drugs aren't measured in milligrams.
Insulin
Insulin is measured in units. Standard U-100 insulin has 100 units in every mL. Give it with an insulin syringe, which is marked in units, so the units ordered are the units you draw up; no calculation in mL is needed.
Watch out: Using a regular mL syringe for insulin. Always use an insulin syringe that matches the insulin's concentration.
Heparin and other unit drugs
Calculate with units just like milligrams. Spell out โunits,โ and double-check heparin and insulin with a second nurse if your facility requires it.
Milliequivalents (mEq)
Electrolytes such as potassium are measured in mEq. Calculate with mEq the same way.
Percent and ratio strengths
A percent drug strength means grams per 100 mL. Change it to mg/mL by writing it as grams over 100 mL and converting grams to mg.
Rounding Rules
Common rules; your program's or facility's policy comes first.
When and how to round
Keep every digit while you work, and round only the final answer. Then round to something you can actually measure and give.
- Tablets: whole or half tablets only, and only if the tablet is scored.
- Oral liquids and injections over 1 mL: the nearest tenth of a mL.
- Injections under 1 mL: the nearest hundredth, with a 1 mL syringe.
- Insulin: whole units, measured on an insulin syringe.
- Children's doses: often to the hundredth; check your program's rule.
Practice Problems
Use any method. Round as the problem says.
Tablets and oral liquids
- Order: 1 g. Tablets: 500 mg. How many tablets?
- Order: 0.125 mg. Tablets: 0.25 mg (scored). How many tablets?
- Order: 250 mg. Label: 125 mg per 5 mL. How many mL?
- Order: 0.3 g. Label: 150 mg per 5 mL. How many mL?
- Order: 7.5 mg. Label: 2.5 mg per mL. How many mL?
Show answers
- 1,000500 = 2 tablets
- 0.1250.25 = ยฝ tablet
- 250125 ร 5 = 10 mL
- 0.3 g = 300 mg โ 300150 ร 5 = 10 mL
- 7.52.5 ร 1 = 3 mL
Injections
- Order: 75 mg IM. Vial: 50 mg/mL. How many mL (nearest tenth)?
- Order: 0.4 mg. Vial: 1 mg/mL. How many mL, and which syringe?
- Order: 60 mg. Vial: 80 mg per 2 mL. How many mL?
Show answers
- 7550 ร 1 = 1.5 mL
- 0.41 = 0.4 mL, 1 mL syringe
- 6080 ร 2 = 1.5 mL
Reconstitution
- A 1 g vial is mixed to 330 mg/mL. Order: 500 mg. How many mL (nearest tenth)?
- A 2 g vial is mixed with 9.6 mL to make 200 mg/mL. Order: 1.5 g. How many mL?
Show answers
- 500330 = 1.515โฆ โ 1.5 mL
- 1.5 g = 1,500 mg โ 1,500200 = 7.5 mL
Units, mEq, and percent
- Order: heparin 7,500 units subcut. Vial: 10,000 units/mL. How many mL?
- Order: 6 units regular insulin and 18 units NPH in one syringe. Total units?
- Order: 40 mEq. Label: 20 mEq per 15 mL. How many mL?
- Lidocaine 1% is how many mg/mL?
Show answers
- 7,50010,000 = 0.75 mL
- 24 units
- 4020 ร 15 = 30 mL
- 1 g100 mL = 1,000 mg100 mL = 10 mg/mL
Keep learning